A higher clicking speed increases the chances of standing out amongst other players.
When looking for the best mouse for Jitter Clicking, there are certain features you should scan the mouse for. Firstly, it is important for the mouse to have a well-built body because the best mouse for Jitter Clicking has to be able to survive the pressure asserted on it. Secondly, the quality of the buttons on the mouse matters. And finally, the mouse should cater to the hand size of the player, because that is essential to be able to control the mouse.
This may seem like a lot of factors to take into consideration, but for your ease, we have put together a comprehensive list that will tell you all you need to know of the best mouse for jitter clicking,
Table of Contents
Top 10 Gaming Mice For JItter Clicking
1. Logitech G602
Logitech G602 is the perfect mouse for people who spend long hours investing in their gaming hobby. Because Jitter Clicking is tiring on the hand by itself, it makes sense to get a mouse that is designed to last players for hours and result in minimal exhaustion.
Build and Design
This mouse is not built for lightweight gaming. It is a fairly heavy mouse, that comes with little to no weight customization options. Sure, you can remove the battery cover and operate the mouse on a single battery but that does not make much of a difference.
If you’re able to look past the weight factor, then the mouse has a lot to offer. It is precise and accurate and comes with programmable buttons that allow you to configure game controls. Moreover, the buttons are raised so that finger placement is convenient.
The body of the mouse is made up of multiple textures. The mouse keys are adorned in black plastic with a matte finish, and the surrounding area is glossed.
There is texturized rubber skin at the top of the mouse surface, where the palm is supposed to rest, but the bottom half is covered with texturized plastic.
Overall the mouse feels reliable and solid-build. It is not the most high-end mouse, but for Jitter Clicking purposes, it is a suitable choice.
Logitech uses laser sensor technology and has a maximum CPI of 2500. Though narrow, it can be increased in steps of 50. The sensor quality is consistent yet the lift-off distance is high.
The polling rate is only 500 Hz, which is decent enough but in comparison with some other gaming mice on the market, it falls short.
However, for practical purposes, it doesn’t make a noticeable difference in tracking and offers a lag-free gaming experience.
2. ROCCAT Kone Pro
If you are looking for the best mouse for jitter clicking but do not want to compromise on aesthetics, performance, or ergonomics, then Roccat Kone Pro is the mouse for you.
Build and Design
The Roccat Kone Pro has outdone itself in all areas. When it comes to ergonomics, a team of specialists researched the human body to decipher what shape best complements it.
Then, they used their findings to make the Roccat Kone Pro. The raised and sunken part of the mouse are placed at just the right place, where the hand can be arched just enough for Jitter Clicking.
Additionally, the bold curves of the mouse minimize the chances of hand and finger fatigue. Thus, you can Jitter Click with maximum comfort.
Roccat Kone Pro is here to give its users a premium gaming experience. It uses an Owl-Sensor by Roccat, which allows users to increase the CPI up to 19,000. The polling rate falls between 125 Hz and 1000 Hz and is adjustable through the software.
The accuracy of the mouse can be attributed to the Optical Mechanical Switches. This precision helps the player during Jitter Clicking. Additionally, the heated feet of the mouse enables smooth gliding across all surfaces.
3. Razer Viper 8KHz
The Razer Viper 8KHz qualifies to be in the list of the best mouse for Jitter Clicking because of its focus on offering players a higher polling rate than other mice in the market. A higher polling rate automatically equates to a faster response time. Players using the jitter clicking technique benefit from their clicks registering as readily as they hit the mouse button.
Build and Design
The body of the mouse is a symmetric construct and is compatible with both right and left-handed users. People with claw grip and fingertip grip would be able to exercise the most control on this mouse as there would be fewer chances of them mis pressing any buttons.
The mouse does not weigh a lot, standing only at 2.5 ounces. The PFTE feet on the mouse enable it to glide smoothly across all surfaces. The textured rubber grips on both sides of the mouse look promising as they make it unlikely for players to have the mouse slip out of their hands while Jitter Clicking.
Razer Viper 8KHz has a high CPI range of 20,000. It uses the Focus+ sensor model by Razer. What makes it stand out from other mice is its polling rate. The Polling rate of the mouse touches up to 8k, and for people who Jitter Click, it is beneficial in syncing up movements.
A high polling rate does not help in FPS games only, but also in PvP games. Additionally, the mouse movements can be manually calibrated through the mouse software
The Razer Viper 8KHz has buttons on both sides. These are the latest optical-mechanical switches. In total, there are 9 programmable buttons and 3 scrolling wheels functions.
The onboard memory of the mouse allows users to toggle between multiple profiles, which means they can customize settings for Jitter Clicking and switch to another profile for normal use of the mouse.
4. Cooler Master MM720
Build and Design
This mouse has the potential to become the go-to gaming mouse. Its honeycomb shell has been crafted to give it a lightweight feel. Cooler Master MM720 takes into consideration finger fatigue, and therefore, comes with dedicated support for the ring finger.
The body of the mouse is built of a glossed material, which aids in establishing a stable grip on the mouse. Moreover, players who prefer even more grip during jitter clicking can simply make use of the grip tape that comes with the mouse.
The Cooler Master MM720 has a shape perfect for Jitter Clicking. In fact, it is the shape of the mouse that has landed it in this list of the best mice for jitter clicking. The shape encourages better wrist movement during jitter clicking. The hand can easily arch while the palm can rest on the mouse, and players can Jitter Click without worrying about hand fatigue.
Cooler Master MM720 comes equipped with a high-grade 16,000 CPI sensor. Its performance is comparable to the fancier mice in the market, as even with a honeycomb shell, a button allows players to change DPI levels directly from the mouse.
The tracking of the mouse is wonderful since the click latency is on the lower side. There is no lag, and the “weaved” wire does not get in the way while gaming.
5. Corsair Nightsword RGB
In an era of wireless mice, Corsair Nightsword RGB stands out as a wired gaming mouse. The wire does not prove to be a nuisance for Jitter Clicking, rather, the Corsair Nightsword RGB makes a convincing candidate for the best Jitter Clicking mouse because of its all-rounded performance.
Build and Design
If you are someone who plays both FPS games as well as MOBA, then this might just become your new favorite. This wired gaming mouse features 10 buttons and is marketed for right-handed users.
The mouse features an elevated hump, which might make it difficult for small-handed people to control the mouse during Jitter Clicking. However, people with medium to large-sized hands, and those whose grip style is palm or claw grip, should be just fine with this mouse.
The Corsair Nightsword RGB goes one step ahead to assure that users have a firm grip on the mouse. It adds grippy skin to the palm rest area. Having a stable grip is essential for jitter clicking because players have to vibrate their hands while controlling the mouse.
Thus, the mouse feels sturdy in the hand. It does not rattle or wobble and has standard feet that glide decently. Overall, the built quality is solid, even the buttons are hard to touch. The mouse also has four RGB lighting zones, giving it a cool exterior.
The Corsair NightSword has a massive CPI range of 18,000. It uses an optical sensor, and the CPI is highly adjustable with only 1-step increments. It has a maximum polling rate of 1000. The click latency of the wired Corsair Nightsword is low and if there is any delay, it is not noticeable. Thus, it is a responsive mouse which is incredible when it comes to accuracy.
The Corsair iCUE software enhances the mouse’s performance even further. It allows users to create macros, configure surface calibration, apply angle snaps, and make the most of the lighting effects.
6. Logitech G Pro Wireless
Logitech is a pioneer in gaming equipment. Year after year, it comes out with new technological releases. It would not be false then, to say that Logitech has something for everyone. Logitech G Pro Wireless is a mouse that will make a good fit for people who jitter click.
Build and Design
The Logitech G Pro Wireless mouse has a body made up of plastic. It feels firm and sturdy in the hand, and no rattle sound is heard when the mouse is squeezed. The side buttons can be shifted from one side to the other. Players can choose to use all four of the buttons as well if they prefer.
For a wireless mouse, Logitech G Pro is lightweight. Its walls may be only 1 mm wide, yet it does not give a flimsy feel. The top has a slight hump, whereas the sides are flatter. The textured surface of the mouse allows players to grip the mouse firmly.
What distinguishes this mouse from other mice is its all-exclusive design. It fits with most hand sizes as well as most grip styles. People with fingertip grip, however, may have to spend some time figuring out how to work this mouse with their grip style.
Thus, those who do not want to be bothered with specifics of hand sizes and grip styles can opt for this mouse as It will take care of the rest and enable players to practice hassle-free jitter clicking.
Logitech G Pro Wireless has an impressive sensor range of 25K CPI. It can be adjusted in increments of 100. The DPI changing button is placed on the lower side of the mouse so that it is not accidentally pressed while gaming.
As people who are Jitter Clicking must be aggressive with their clicks, this feature helps because it prevents an unintended change of DPI.
The rounded feet of the mouse cause it to glide with no detected break. A high polling rate coupled with a low lift-off distance works to make a lag-free gaming experience possible.
7. HyperX Pulsefire Haste
People with small hands who Jitter Click may find the HyperX Pulsefire Haste to be the best mouse for Jitter Clicking
Build and Design
With a petite body, the HyperX Pulsefire Haste looks as if it was built to specially to accommodate people with small hands. Its size may be non-threatening, but it comes packed with features that make it a good choice for gamers who jitter click.
Covered in black-colored plastic, the mouse has a matte finish. There are holes in its body yet that does not affect the durability of the mouse. Because of its lightweight and small size, the mouse can be controlled with minimal effort.
The mouse also supports a hump, high enough to guide the hand in a comfortable yet slightly raised position. For jitter clicking, the hand and wrist are slightly arched as to vibrate them without the mouse getting in the way.
HyperX Pulsefire Haste makes use of a Pixart sensor of 16,000 CPI to offer players a pleasant gaming experience. The mouse software allows the configuration of DPI presets, as well as reprogramming of 4 of the 6 buttons. The polling rate is adjustable as well, and so is the RGB light setting.
The onboard memory of the mouse however can store only a single profile, but players can make multiple profiles in the software.
8. RAZER DEATHADDER V2
The Razer DeathAdder has come a far way since its introduction in 2006. The V2 model is the upgraded version of this series.
Build and Design
People who have used DeathAdder swear by it. If you are amongst its loyal users, then you’d be delighted to find that it is suitable for jitter clicking as well.
However, if this is your first time hearing of this mouse then read on to learn of its specifications that will help you understand why it is such a favorite among the gaming community.
The Death Adder V2 is a medium-sized mouse that palm grip players can use comfortably. As palm grip is the most common grip style it is likely that a good amount of people who jitter click use a palm style grip. The elongated design of the mouse does not cause hindrance for any hand size.
There is a slight curvature in the body of the mouse, which is covered with rubber and has a matte finish. The shell of the mouse is coarse meaning it can withstand the pressure applied by the coordinated movement of the arm and wrist during Jitter Clicking.
Moreover, the combination of mechanical and optical switches makes it a competitive candidate for the best mouse for jitter clicking.
The mouse has a decent CPI of 20,000, which is adjustable in increments of 100. It is equipped with an Optical LED Focus+ Sensor. The total number of buttons on the mouse are 8, with each of them capable of being programmed via the software that comes along with the mouse.
The onboard memory of the mouse can store up to 5 profiles that players can switch between using the button on the mouse, dedicated for this function specially.
Thanks to the hypershift button, the number of functions on the mouse can essentially be doubled. In addition, configuration options are also available for Tracking speed, Polling Rate, and Light Zones.
9. Glorious Model O-
The new Model O minus combines lightweight gaming with an ambidextrous design, thus catering to a large number of people.
Build and Design
Model O Minus is amongst the lightest mice in the market, standing at just 65 grams. Despite the weight, it manages to retain a sturdy body that feels strong in the hand.
It does not rattle or wobble under pressure, which is a defining feature considering that Jitter Clicking requires players to grip the mouse quite hard. The bottom of the mouse is flexible, but it does not cause any problems during gaming.
The mouse uses Kailh Switches that can sustain up to 80 million clicks. The clicks are much crisper, and the quality difference becomes apparent in the way that the switches sound and feel.
Since the aim of Jitter Clicking is to achieve maximum clicks per second, people who frequently Jitter Click can rely on this mouse to last them a long time.
The mouse has an excellent click latency, meaning, It is fairly low. The wide CPI range of 19,000 DPI can be adjusted in small increments. It makes use of the BAMF sensor that is a product of a Pixart Collaboration. It has a maximum polling rate of 1000 Hz and tracks smoothly.
The only downside is that the mouse software is not compatible with macOS. On other systems though, it allows reprogramming any button as well as changing up the RGB lighting.
10. SteelSeries Rival 310
SteelSeries Rival 600 Gaming Mouse is an ergonomic mouse that has been crafted to fit naturally into the curve of the hand.
Build and Design
The body of the mouse is covered in textured plastic. The design and build of the mouse encourage control. The sides are adorned with a rubber pattern, to make it easier to control the mouse. The hump in the middle of the mouse ensures that the hand does not slip off while Jitter Clicking.
It also takes ergonomics into consideration, as there is a groove for thumb rest, and a slope that extends outward. This slope makes it easier to use the mouse for Jitter Clicking without encountering the buttons on the side of the mouse.
The frontal section of the mouse is narrow while the back is wide. People with a palm grip will be appreciative of the ergonomic design of the mouse. The Scroll Wheel of the mouse is typical of a steel series mouse. It does not stick out much and has soft steps.
The maximum CPI of the mouse is 12000. It is adjustable beyond 100. A TrueMove 3 Optical LED sensor ensures that the mouse becomes a good choice for competitive gaming. The polling rate of the mouse is 1000 Hz.
SteelSeries Rival 310 has 6 buttons and 8 programmable inputs. Profile Switching is possible but not through the mouse.
Jitter Clicking is the hardest clicking technique to learn, and if not done right, it can cause pain in the hand and wrist.
While choosing the best mouse for Jitter Clicking can help with practicing Jitter Clicking without getting tired, it is important to take breaks in between.
Regardless of the type of mouse you are using, repeated movements do cause strain so do not ignore your health for the sake of Jitter Clicking.
Our well-researched list is here to help you find the best mouse for Jitter Clicking. Choose wisely, but do not forget to incorporate healthy gaming practices while Jitter Clicking.
ButterFly clicking is a tad faster than Jitter if you keep all the other factors the same. The average person’s butterfly click speed test ranges between 15 to 20 clicks per second. Whereas, jitter clicking is between 10-15.
Kevin is a Tech journalist for over a decade. He writes on Wearables, Headphones, and Laptops. When he is not glued to his laptop, You will find him working on exciting projects that include Unboxing new Gadgets, comparing them, and tweaking their hardware.