The Apple AirPods are some of the most advanced wireless earbuds on the market. They work seamlessly with your iPhone, iPad, and MacBook, and they provide a high-quality listening experience.
With that said, there may come a time when you want to reset your AirPods back to factory settings. If this sounds like something you need help with, then keep reading!
Below we will discuss how to restore your Apple AirPods back to their original settings so that you can get rid of any problems or issues that might be preventing them from working properly.
Table of Contents
How Do I Reset My Airpods?
How do I reset my AirPods and AirPods pro? It’s never been easier to reset your AirPods before. You may erase your AirPods from the Bluetooth menu and reset them on the case you use to charge them using this method.
How Do I Reset My Airpods Before Selling:
You may choose to unlink and reset your Airpods if you want to sell them. Unpairing is not just for iPhone and iOS users. You can remove your Airpods from all of your devices. The earbuds will operate as if they have been new since you unpair them from any one of your gadgets.
You can use the same method on any Airpods you own. Here are a few steps to remember when resetting them properly:
1- To reset your AirPods, you first need to place them in their charging case for at least 30 seconds so that all of the connections between the two buds and the charging case can be restored.
2- After this is done, open the lid of the charging case and open up your Settings app on your iPhone or iPad.
3- Click “Bluetooth” and make sure that your AirPods are listed in the “My Devices” section.
4- At this point, click on a small circular cog icon next to your AirPods in the Bluetooth menu.
5- To remove the Airpods from the device, select “Forget This Device.”
6- Open the lid and press the tiny button at the back of the case. The case’s status will be blinking amber if you keep it pressed for about 15 seconds. You should then release the button after doing so.
7- To re-pair your AirPods, hold them near the device while the lid is still open.
If you have an Android phone, the first point is the same. Then you should have to follow below steps:
8. Go to Settings, then Connected Devices. Next, find your AirPods or AirPods Pro and hit the small circular cog icon next to them.
9. Now, tap Forget and then Forget device to confirm.
What Does the Light on the Airpods Mean?
On the Airpods, a status light is located at the top of the compartment. If you’re using the wired charging case, it’s beneath the lid. The LED on the wireless charging case is on the outside front of it.
The lights may be programmed to express a variety of meanings and concerns. This is determined by the position of your Airpods at the moment. You must understand the significance of the various lights before resetting them.
The LED status indicates how much charge remains in your Airpods. The green light is a sign of good battery health. Your Airpods have a long enough battery life to meet your demands. However, if you notice a green light while the Airpods are not in the case, you only have one remaining charge.
Despite the fact that you can’t see the battery percentage, the status lights indicate the same thing and effectively. You may check out your Airpods’ genuine life expectancy from your iPhone if you open up your Airpod case.
If the amber light is blinking, it indicates that there is a problem. This might be with one or more of your devices. It’s usually linked to a server connection issue. You should reset your Airpods and try again if this happens.
A white flashing light indicates that the Airpods are ready to link. It connects to your Apple devices. If the Airpods are in the case and there is no light, it indicates that the charge has been used up and must be replenished.
When Might You Need to Reset Your Airpods?
If the Airpods do not appear in your Bluetooth list, you can reset them. If they still do not appear when you’ve reset them, it means that the connection between them and their case has been disrupted. You may be required to reset it again.
Here are some scenarios where you might need to reset your Airpods:
Your iPhone or any other device is unable to detect your Airpods. For instance, if you have recently paired AirPods with an Android device. It’s advisable to restart both devices before performing a little troubleshooting.
The sound quality on one of the earpieces is poor for apparent reasons but checking out how much charge remains in either your earbuds or charging case might help.
AirPods keep disconnecting, especially when you’re not near the charging case. In this instance, resetting your Airpods will help to reconnect them.
The AirPods are lost or you have gifted someone then you have to reset your Airpods.
How To Re-pair Your Airpods
There might be a time when you need to re-pair your AirPods with your devices. This usually happens when you switch from one device to another.
To do this:
1. Open the charging case lid and hold your Airpods close to the front of the case.
2. Make sure that the light on top is blinking white.
3. The AirPods will now automatically enter pairing mode.
4. On your device, go to Settings and select Bluetooth.
5. Under “My Devices,” you should see your AirPods listed under “Other Devices.”
6. Tap on the name of your AirPods and they will then connect to your device.
7. If this does not work, open the case near your device and the AirPods should now appear as an available option.
8. Hit Connect and then you’re done!
On an Android smartphone or a Windows PC, however, you must open the Airpods case and press and hold the setup button. Press until the status light starts flashing. After that, you’ll go to your device’s Bluetooth menu and connect like any other accessory.
What Are Other Applications To Use
Using other programs while you’re using your Mac may help to keep things running smoothly. When you insert your Airpods, they should automatically connect to your Mac. The procedure may be difficult at times. For a better solution for your Mac, try Tooth Fairy instead.
The program extends your Mac’s Bluetooth settings. You can easily create a menu bar for your Airpods, which the software enables you to do. This comes with a personalized icon of your choosing. This allows you to quickly connect your Airpods by simply clicking a button. You won’t have to go through your preferences menu anymore in order to pair them.
Toothfairy also supports additional accessories that may be connected via Bluetooth. The software essentially lets you create shortcuts that will let you link your gadgets together.
The sound quality on the Airpods is excellent. You may take another step and improve the audio quality. Most of us would prefer a built-in equalizer in the Mac, if possible. The Boom 3d program can accomplish this.
The program lets you produce 3D sound straight from your Mac. There is no need for a large room with speakers. You may use the Boom 3D software to create virtual settings that replicate the sound environment.
The equalizer is also present in this version. You may even fine-tune the settings depending on the music genre you’re listening to. It offers similar control as your iPhone does. Boom 3D’s volume controls can be tailored to each application separately, just like on iOS.
This is useful for video players with a volume all the time. It also targets annoying pop-ups. They are disruptive, and when listening to music, they’re particularly noisy.
Final Thoughts:
The process of resetting your Airpods is quite straightforward. It’s a function that Apple has made simple and excels at. Resetting is a fast answer that is pretty easier than you may think.
Any Bluetooth device may be a huge pain to deal with. The Airpods’ ease of use is unmatched. They have a long battery life and can operate for several hours on a single charge. Their popularity is well earned.
Airpods, on the other hand, are not as quick when used with a Mac. The Mac settings differ from those of the iPhone. I must emphasize that dealing with a Mac is more difficult than dealing with an iPhone.
Despite this, AirPods are simple to use. It is also considerably easier to re-pair and reset them. Wiping them may only take a few minutes. However, it eradicates many issues that the Airpods have previously had.
Kevin is a Tech journalist for over a decade. He writes on Wearables, Headphones, and Laptops. When he is not glued to his laptop, You will find him working on exciting projects that include Unboxing new Gadgets, comparing them, and tweaking their hardware.